Cisco Systems MDS 9000 show install all status, 20-75, Defaults, Command Modes, Usage Guidelines

Chapter 20 Show Commands

show install all status

show install all status

To display the on-going install all command status or the log of the last installed install all command from a Console, SSH, or Telnet session, use the show install all status command.

show install all status

Syntax Description	This command has no arguments or keywords.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.3(1).
	This command only displays the status of an install all command that is issued form the CLI (not the
Usage Guidelines
	Fabric Manager).
	Use the show install all status command to view the output of a install all command process.
Examples
	switch# show install all status
	There is an on-going installation... <---------------------- in progress installation
	Enter Ctrl-C to go back to the prompt.
	Verifying image bootflash:/b-1.3.0.104
	-- SUCCESS
	Verifying image bootflash:/i-1.3.0.104
	-- SUCCESS
	Extracting “system” version from image bootflash:/i-1.3.0.104.
	-- SUCCESS
	Extracting “kickstart” version from image bootflash:/b-1.3.0.104.
	-- SUCCESS
	Extracting “loader” version from image bootflash:/b-1.3.0.104.
	-- SUCCESS
	switch# show install all status
	This is the log of last installation.	<<<<<< log of last install

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-75