Cisco Systems MDS 9000 show fcdomain, address-allocation, cache, allowed, domain-list, 20-33

Chapter 20 Show Commands

show fcdomain

show fcdomain

To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command.

show fcdomain [address-allocation [cache] allowed domain-list fcid persistent [unused] statistics [interface {fc slot/port fcip fcip-idiscsi slot/port}]] [vsan vsan-id]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

address-allocation	Displays statistics for the fcid allocation
cache	The cache is used by the principle switch to reassign the FC IDs for a
	device (disk or host) that exited and reentered the fabric. In the cache
	content, VSAN refers to the VSAN that contains the device, WWN refers
	to the device that owned the FC IDs, and mask refers to a single or entire
	area of FC IDs.
allowed	Displays a list of allowed domain IDs.
domain-list	Displays list of domain ids granted by the principal sw
fcid persistent	Displays persistent FCIDs (across reboot)
statistics interface	Displays the statistics of fcdomain
fc slot/port	Specifies a Fibre Channel interface.
fcip fcip-id	Specifies an FCIP interface. The range is 1 to 255.
iscsi slot/port	Specifies an iSCSI interface.
vsan vsan-id	Specifies a VSAN ID. The range is 1 to 4093).
None.
EXEC mode.

This command was introduced in Cisco MDS SAN-OS Release 1.0(2).

Issuing the show fcdomain with no arguments displays all VSANs. The VSANs should be active or you will get an error.

The following example displays the fcdomain information for VSAN 1.

switch# show fcdomain vsan 1

The local switch is a Subordinated Switch.

Local switch run time information:

State: Stable

Local switch WWN: 20:01:00:05:30:00:51:1f

Running fabric name: 10:00:00:60:69:22:32:91

Running priority: 128

Current domain ID: 0x64(100) ß verify domain id

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-33