Cisco Systems MDS 9000 show telnet server, 20-173, Defaults, Command Modes, Usage Guidelines

Chapter 20 Show Commands

show telnet server

show telnet server

	To display the state of the Telnet access configuration, use the show telnet server command.
	show telnet server
Syntax Description	This command has no arguments or keywords.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines	None.
Examples	The following example displays the status of the Telnet server.
	switch# show telnet server
	telnet service enabled

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-173