Cisco Systems MDS 9000 manual show ntp, timestamp-status, peers, local, memory, ipaddr ip-address

Chapter 20 Show Commands

show ntp

show ntp

To display the configured Network Time Protocol (NTP) server and peer associations, use the show ntp command.

show ntp {peers statistics [io local memory peer {ipaddr ip-address name peer-name}]

	timestamp-status}
Syntax Description	peers	Displays all the peers.
	statistics	Displays the NTP statistics
	io	Displays the input/output statistics.
	local	Displays the counters maintained by the local NTP.
	memory	Displays the statistics counters related to memory code.
	peer	Displays the per-peer statistics counter of a peer.
	ipaddr ip-address	Displays the peer statistics for the specified IP address.
	name peer-name	Displays the peer statistics for the specified peer name.
	timestamp-status	Displays if the timestamp check is enabled.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines	None.

	Cisco MDS 9000 Family Command Reference
20-122	78-16088-01, Cisco MDS SAN-OS Release 1.3