Cisco Systems MDS 9000 show span session session-id brief brief, SPAN session ID, 20-150

Chapter 20 Show Commands

show span session

show span session

To display specific information about a Switched Port Analyzer (SPAN) session, use the show span session command.

show span session [session-id[brief] brief]

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

session-id	SPAN session ID (1-16).
brief	Displays SPAN session configuration in brief format.

None.

EXEC mode.

This command was modified in Cisco MDS SAN-OS Release 1.2(1).

None.

The following example displays SPAN sessions in a brief format.

switch# show span session brief

--------------------------------------------------------

Session Admin	Oper	Destination
State	State	Interface

--------------------------------------------------------

7 no suspend active fc2/7

The following example displays a specific SPAN session details.

switch# show span session 7 Session 7 (active)

Destination is fc2/7

No session filters configured No ingress (rx) sources Egress (tx) sources are

port-channel 7,

	Cisco MDS 9000 Family Command Reference
20-150	78-16088-01, Cisco MDS SAN-OS Release 1.3