Cisco Systems MDS 9000 manual show ip route, configured, 20-86, Defaults, Command Modes, Examples

Chapter 20 Show Commands

show ip route

show ip route

To display the ip routes currently active, use the show ip route command. show ip route [configured]

Syntax Description	configured	Displays configured IP routes.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines	None.
Examples	The following example displays active IP routes.
	switch# show ip route

Codes: C - connected, S - static

Default gateway is 172.22.95.1

C 10.0.0.0/24 is directly connected, vsan1

C 172.22.95.0/24 is directly connected, mgmt0

The following example displays configured IP routes.

switch# show ip route configured
default	172.22.31.1	0.0.0.0	0	mgmt0
10.10.11.0	10.10.11.1	255.255.255.0	0	GigabitEthernet1/1
10.10.50.0	10.10.50.1	255.255.255.0	0	GigabitEthernet1/2.1
10.10.51.0	10.10.51.1	255.255.255.0	0	GigabitEthernet1/2.2
10.10.60.0	10.10.60.1	255.255.255.0	0	GigabitEthernet1/2
172.22.31.0	172.22.31.110	255.255.255.0	0	mgmt0

	Cisco MDS 9000 Family Command Reference
20-86	78-16088-01, Cisco MDS SAN-OS Release 1.3