Cisco Systems MDS 9000 show fcfwd, multicast statistics unicast spanmap rx tx, idxmap, pcmap

Chapter 20 Show Commands

show fcfwd

show fcfwd

To display the configured fcfwd tables and statistics, use the show fcfwd command.

show fcfwd {idxmap [interface-toport port-to-interface statistics] pcmap [interface] sfib

	[multicast statistics unicast] spanmap [rx tx]}
Syntax Description	idxmap	Displays FC forward index tables.
	interface-to-port	Displays interface index to port index table.
	port-to-interface	Displays port index to interface index table.
	statistics	Displays index table statistics.
	pcmap	Displays FC forward PortChannel table.
	interface	Displays PortChannel table for an interface.
	sfib	Displays software forwarding tables.
	multicast	Displays multicast software forwarding tables.
	statistics	Displays software forwarding statistics.
	unicast	Displays unicast software forwarding tables.
	spanmap	Displays SPAN map tables.
	rx	Displays SPAN map table in ingress -rx direction.
	tx	Displays SPAN map table in egress -tx direction.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines	None.
Examples	The following example displays fcfwd SPAN map receive information.
	switch# show fcfwd spanmap rx
	SPAN source information: size [c8]
	dir source	vsan bit drop_thresh destination

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-37