Cisco Systems MDS 9000 show fcsp, Displays the DHCHAP hash algorithm status, 20-51, fc slot/port

Chapter 20 Show Commands

show fcsp

show fcsp

To display the status of the Fibre Channel Security Protocol (FC-SP) configuration, use the show fcsp commands.

show fcsp [asciiwwn ascii-wwndhchap [database] interface fc slot/port [statistics wwn] fcip interface-number[statistics wwn]]

Syntax Description	asciiwwn ascii-wwn	Displays the ASCII representation of the WWN used with AAA server.
	dhchap	Displays the DHCHAP hash algorithm status.
	database	Displays the contents of the local DHCHAP database.
	interface	Displays the FC-SP settings for a FC or FCIP interface.
	fc slot/port	Displays the Fibre Channel interface in the specified slot and port.
	fcip interface-number	Displays the description of the specified FCIP interface from 1 to 255.
	statistics	Displays the statistics for the specified interface.
	wwn	Displays the FC-SP identity of the other device.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.3(1).
Usage Guidelines	None.
Examples	The following example displays DHCHAP configurations in FC interfaces.
	switch# show fcsp interface fc1/9

fc1/9:

fcsp authentication mode:SEC_MODE_ON Status: Successfully authenticated

The following example displays DHCHAP statistics for a FC interfaces. switch# show fcsp interface fc1/9 statistics

fc1/9:

fcsp authentication mode:SEC_MODE_ON Status: Successfully authenticated Statistics:

FC-SP Authentication Succeeded:5 FC-SP Authentication Failed:0 FC-SP Authentication Bypassed:0

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-51