Cisco Systems MDS 9000 show running-config, diff, fc-tunnel tunnel-id, fcip fcip-number, sup-fc

Chapter 20 Show Commands

show running-config

show running-config

To display the running configuration file, use the show running-configcommand

	show running-config
	[diff
	interface [cpp fc fc slot/port fc-tunnel tunnel-idfcip fcip-numbergigabitethernet
	slot/port iscsi slot/port mgmt 0 port-channel svc vsan vsan-id]
	vsan vsan-id]
Syntax Description	diff	Displays the difference between the running and startup configurations.
	interface	Displays running configuration information for a range of interfaces.
	cpp	Displays the virtualization interface specific to the ASM module.
	fc slot/port	Displays the Fibre Channel interface in the specified slot and port.
	fc-tunnel tunnel-id	Displays description of the specified FC tunnel from 1 to 4095.
	fcip fcip-number	Displays the description of the specified FCIP interface from 1 to 255.
	gigabitethernet	Displays the description of the Gigabit Ethernet interface in the specified
	slot/port	slot and port.
	iscsi slot/port	Displays the description of the iSCSI interface in the specified slot and port.
	mgmt 0	Displays the description of the management interface.
	port-channel	Displays the description of the PortChannel interface.
	sup-fc	Displays the inband interface details.
	svc	Displays the virtualization interface specific to the CSM module.
	vsan vsan-id	Displays VSAN-specific information. The ID ranges from 1 to 4093.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
	If the running configuration is different from the startup configuration, issue the show startup-config
Usage Guidelines
	diff command to view the differences.

	Cisco MDS 9000 Family Command Reference
20-142	78-16088-01, Cisco MDS SAN-OS Release 1.3