Cisco Systems MDS 9000 manual show boot module slot variable-name sup-1 sup-2 variables, 20-8

Chapter 20 Show Commands

show boot

show boot

To display the boot variables or modules, use the show boot command.

	show boot [module [slot variable-name] sup-1 sup-2 variables]
Syntax Description	module	Displays the boot variables for modules.
	slot	Specifies a module by the slot number.
	variable-name	Specifies the variable. Maximum length is 80 characters.
	sup-1	Displays the upper sup configuration.
	sup-2	Displays the lower sup configuration.
	variables	Displays the list of boot variables.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was modified in Release 1.2(2).
Usage Guidelines	None.
Examples	The following example displays the current contents of the boot variable.
	switch# show boot
	kickstart variable = bootflash:/kickstart-image
	system variable = bootflash:/system-image

Module 2

asm-sfn variable = bootflash:/asm-image

The following example displays the images on the specified ASM module.

switch# show boot module Module 2

asm-sfn variable = bootflash:/asm-image

The following example displays a list of all boot variables. The ASM-SFN boot variable is used for the ASM.

switch# show boot variables

List of boot variables are: asm-sfn

system kickstart

	Cisco MDS 9000 Family Command Reference
20-8	78-16088-01, Cisco MDS SAN-OS Release 1.3