Cisco Systems MDS 9000 show rlir, erl vsan-id, Displays link incident history, 20-135, Defaults

Chapter 20 Show Commands

show rlir

show rlir

To display the information about Registered Link Incident Report (RLIR), Link Incident Record Registration (LIRR), and Distribute Registered Link Incident Record (DRLIR) frames, use the show rlir command.

show rilr {erl [vsan vsan-id] history recent [interface fc slot/port portnumber port-number] statistics [vsan vsan-id]}

Syntax Description			erl vsan-id	Displays Established Registration List (ERL) information.
			vsan vsan-id	Specifies a VSAN ID. The range is 1 to 4093.
			history	Displays link incident history.
			recent	Displays recent link incident.
			interface fc slot/port	Specifies a Fibre Channel interface at a slot and port.
			portnumber port-numberSpecifies a port number for the link incidents. The range is 1 to 224.
			statistics	Displays RLIR statistics.
Defaults			None.
Command Modes			EXEC mode.
Command History			This command was modified in Cisco MDS SAN-OS Release 1.3(2).
Usage Guidelines			If available, the host timestamp (marked by the *) is printed along with the switch timestamp. If the host
			timestamp is not available, only the switch timestamp is printed.
Examples			The following example displays the RLIR statistics for all VSANs.
			switch# show rlir statistics
			Statistics for VSAN: 1
		-------------------------
			Number of LIRR received		= 0
			Number of LIRR ACC sent		= 0
			Number of LIRR RJT sent		= 0
			Number of RLIR sent		= 0
			Number of RLIR ACC received		= 0
			Number of RLIR RJT received		= 0
			Number of DRLIR received		= 0
			Number of DRLIR ACC sent		= 0
			Number of DRLIR RJT sent		= 0
			Number of DRLIR sent		= 0
			Number of DRLIR ACC received = 0
			Number of DRLIR RJT received = 0
					Cisco MDS 9000 Family Command Reference
	78-16088-01, Cisco MDS SAN-OS Release 1.3					20-135