Cisco Systems MDS 9000 show qos, interface fc slot/port vsan vsan-id statistics, class-map, dwrr

Chapter 20 Show Commands

show qos

show qos

To display the current QoS settings along with a the number of frames marked high priority, use the show qos command.

show qos {class-map [name class-name] dwrr policy-map [name policy-name] service policy

	[interface fc slot/port vsan vsan-id] statistics}
Syntax Description	class-map	Displays QoS class maps.
	name class-name	Specifies a class map name. Maximum length is 63 alpha-numeric characters.
	dwrr	Displays deficit weighted round robin queue weights.
	policy-map	Displays QoS policy-maps.
	name policy-name	Specifies a policy map name. Maximum length is 63 alpha-numeric characters.
	service policy	Displays QoS service policy associations.
	interface fc	Specifies a Fibre Channel interface.
	slot/port
	vsan vsan-id	Specifies a VSAN ID. The range is 1 to 4093.
	statistics	Displays QoS related statistics.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was modified in Cisco MDS SAN-OS Release 1.3(1).
	To access all but the statistics option for this command, you must perform the qos enable command.
Usage Guidelines
Examples	The following example displays the contents of all class maps.
	switch# show qos class-map

qos class-map MyClass match-any

match dest-wwn 20:01:00:05:30:00:28:df match src-wwn 23:15:00:05:30:00:2a:1f match src-intf fc2/1

qos class-map Class2 match-all match src-intf fc2/14

qos class-map Class3 match-all

match src-wwn 20:01:00:05:30:00:2a:1f

	Cisco MDS 9000 Family Command Reference
20-132	78-16088-01, Cisco MDS SAN-OS Release 1.3