Cisco Systems MDS 9000 manual show role name string, 20-139, Syntax Description, DefaultsNone

Chapter 20 Show Commands

show role

show role

To display roles (and their associated rules) configured on the switch, including those roles that have not yet been committed to persistent storage, use the show role command.

show role [name string]

Syntax Description name string The name of the role for which you want to display information.

DefaultsNone.

Command Modes EXEC mode.

Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).

Usage Guidelines The rules are displayed by rule number and are based on each role. All roles are displayed when a role name is not specified.

Only network-admin role can access this command.

Examples	The following example displays rule information for all roles on the switch.
	switch# show role
	Role: network-admin
	Description: Predefined			Network Admin group. This role cannot be modified
	Access	to all the switch commands
	Role: network-operator
	Description: Predefined			Network Operator group. This role cannot be modified
	Access	to Show commands		and selected Exec commands
	Role: sangroup
	Description: SAN management group
	-----------------------------------------
	Rule	Type	Command-type		Feature
	-----------------------------------------
	1.	permit	config		*
	2.	deny	config		fspf
	3.	permit	debug		zone
	4.	permit	exec		fcping

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-139