Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.
Press the l button, and switch to the focus check display (p. 44).
A white frame will appear where the AF frame or face was when the focus was set.
A gray frame will appear on a face detected during playback.
The area within the orange frame appears magnified.
Switch frames.
●Move the zoom lever toward k once. The screen at the left will appear.
●Press the m button to move to a different frame when multiple frames appear.
Change the magnification level or location.
●Use the zoom lever to change the display size, and the opqr buttons to change the display position while checking the focus.
●Pressing the n button resets the display to Step 1.
