Cisco Systems MDS 9000 show processes cpu log details pid process-id memory, 20-129, Defaults

Chapter 20 Show Commands

show processes

show processes

To display general information about all the processes, use the show processes command.

		show processes [cpu log [details pid process-id] memory]
Syntax Description		cpu			Displays processes CPU information.
		log			Displays information about process logs.
		details			Displays detailed process log information.
		pid process-id			Displays process information about a specific process ID. The range is 0 to
					2147483647.
		memory			Displays processes memory information.
Defaults		None.
Command Modes		EXEC mode.
Command History		This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Usage Guidelines		None.
Examples		The following examples display general information about system processes.
		switch# show process
		PID	State	PC	Start_cnt	TTY	Process
	-----		-----	--------	-----------	----	-------------
	868		S	2ae4f33e	1	-	snmpd
	869		S	2acee33e	1	-	rscn
	870		S	2ac36c24	1	-	qos
	871		S	2ac44c24	1	-	port-channel
	872		S	2ac7a33e	1	-	ntp
	-		ER	-	1	-	mdog
	-		NR	-	0	-	vbuilder

PID: process ID.

State: process state

Duninterruptible sleep (usually IO) R runnable (on run queue)

S sleeping

T traced or stopped

Z a defunct (“zombie”) process

NR	not-running
ER	should be running but currently not-running
	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-129