Cisco Systems MDS 9000 show ips ip route, Exec, 20-89, Defaults, None, Command Modes, Examples

Chapter 20 Show Commands

show ips ip route

show ips ip route

To show the IP storage route table information, use the show ips ip route command. show ips ip route interface gigabitethernet slot/port

Syntax Description	interface gigabitethernet slot/port Specifies a Gigabit Ethernet interface by the slot and port.
Defaults	None.
Command Modes	EXEC
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.1(1).
Usage Guidelines	None.
Examples	The following example displays the IP route table information for a Gigabit Ethernet interface.
	switch# show ips ip route interface gigabitethernet 8/1
	Codes: C - connected, S - static
	No default gateway
	C 10.1.3.0/24 is directly connected, GigabitEthernet8/1

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-89