Cisco Systems MDS 9000 manual show hardware, ipc-channel status, 20-69, Defaults, Command Modes

Chapter 20 Show Commands

show hardware

show hardware

To display switch hardware inventory details, use the show hardware command. show hardware [ipc-channel status]

Syntax Description	ipc-channel status		Displays the status of the interprocess communication (IPC) channels.
Defaults	None.
Command Modes	EXEC mode.
Command History	This command was introduced in Cisco MDS SAN-OS Release 1.2(1).
Usage Guidelines	None.
Examples	switch# show hardware
	Cisco Storage Area Networking Operating System (SAN-OS) Software
	TAC support:http://www.cisco.com/tac
	Copyright (c) 1986-2002 by cisco Systems, Inc. All rights reserved.
	The copyright for certain works contained herein are owned by
	Andiamo Systems, Inc. and/or other third parties and are used and
	distributed under license.
	Software
	BIOS:	version 0.0.0
	loader:	version 1.0(0.259)
	kickstart:version 1.0(2) [build 1.0(0.280)]
	system:	version 1.0(2) [build 1.0(0.280)]
	BIOS compile time:			10/10/02
	kickstart image file is:bootflash:/boot-280
	kickstart compile time: 11/20/2002 6:00:00
	system image file is:			isan-280
	system compile time:			11/20/2002 6:00:00
	Hardware
	RAM 963108 kB
	bootflash:503808 blocks (block size 512b)
	slot0:	0 blocks (block size 512b)

172.22.92.28 uptime is 0 days 0 hour 31 minute(s) 23 second(s)

Last reset

Reason:Watchdog Timeout/External Reset

System version:1.0(2)

	Cisco MDS 9000 Family Command Reference
78-16088-01, Cisco MDS SAN-OS Release 1.3		20-69