Carrier Access none Log security notify, Log sip, Example config# log security notify warn, Level

Global Configuration Mode

Global Configuration Commands

log security notify

Use the log security notify command to set the remote security notify level.

Syntax: (config)# log security notify {errorinfoip-address address

nonewarn}

Field	Definition
error	Notify for error level.
info	Notify for information level.
ip-address address	Enter IP address of remote system to notify.
none	No notification.
warn	Notify for warning level.

Example: (config)# log security notify warn

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

log sip

Use the log sip command to configure SIP logging. To stop a SIP log, see no log sip command on page 4-44.

Syntax: (config)# log sip {buffer-fill {01}buffer-size kilobytes display numberenablelevel {detailnon-detailed}}

Field	Definition
buffer-fill {01}	Define the method of loading the buffer.
	0 = Circular Buffer - the buffer will store a continuous stream of data
	by starting again at the beginning of the buffer after reaching the end.
	Default.
	1 = Fill Until Full - the buffer will fill until it is full. The user will
	have to clear the log manually.
buffer-size kilobytes	Configure the SIP log size. Range is 1 - 250 KB, with a default of 100
	KB.
display number	Defines the number of lines per message. 0 = full
enable	Enable SIP logging.
level	Defines the logging level.
	detailed - Set logging level to detail.
	non-detailed- Set logging level to non-detail

Example: (config)# log sip buffer-fill 0

Supported Platforms: Adit 3104, Adit 3500, MSR

4-30 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI