Carrier Access none manual Multilink-group, No encapsulation ppp

Configuration - Serial Interface Mode

multilink-group

Use the Serial Interface multilink-groupcommand to configure a MLPPP group.

Syntax: (config-int-ser-{n})# multilink-group group-number

Field	Definition
group-number	Enter multilink group.
	Adit 3104, Adit 3200, Adit 3500: Value must be 1.
	MSR: Range = 1-8.

Example: (config-int-ser-1)# multilink-group 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no commands

no encapsulation ppp

Use the Serial Interface no encapsulation ppp command to disable PPP encapsulation. To enable encapsulation, see encapsulation ppp command on page 13-4.

Syntax: (config-int-ser-{n})# no encapsulation ppp

Example: (config-int-ser-1)# no encapsulation ppp

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no firewall

Use the Serial Interface no firewall command to disable the configured firewall. To enable the firewall, see firewall command on page 13-5.

Syntax: (config-int-ser-{n})# no firewall

Example: (config-int-ser-1)# no firewall

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

13-14 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI