Carrier Access none manual No digit-map, No registration enable

Configuration - Voice Port Trunk Mode

no digit-map

Use the Voice Port Trunk no digit-mapcommand to disable digit map on the trunk. To configure digit map, see digit-mapcommand on page 24-3.

Syntax: (config-vport-trk-{n})# no digit-map

Example: (config-vport-trk-1)# no digit-map

Supported Platforms: Adit 3500, MSR

no echo-cancel

Use the Voice Port Trunk no echo-cancelcommand disable echo cancellation on this port. To enable echo cancellation, see echo-cancelcommand on page 24-5.

Syntax: (config-vport-trk-{n})# no echo-cancel

Example: (config-vport-trk-1)# no echo-cancel

Supported Platforms: Adit 3500, MSR

no registration enable

Use the Voice Port Trunk no registration enable command disable trunk registration. To enable registration, see registration enable command on page 24-12.

Syntax: (config-vport-trk-{n})# no registration enable

Example: (config-vport-trk-1)# no registration enable

Supported Platforms: Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 24-9