Carrier Access none manual Ppp username, Syntax config-int-mlink-n# ppp username username

Configuration - Multilink Interface Mode

ppp username

Use the Multilink Interface ppp username command set the PPP Login User Name. To delete a PPP user, see no ppp qos interleaving command on page 12-19.

Syntax: (config-int-mlink-{n})# ppp username username

Field	Definition
username	Enter the Username, with a maximum of 19 characters.

Example: (config-int-mlink-1)# ppp username test-user-name

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

schedule-availability

Use the Multilink Interface schedule-availabilitycommand to apply a schedule rule to this interface. To delete a schedule, see no schedule-availabilitycommand on page 12-20.

Syntax: (config-int-mlink-{n})# schedule-availability time-range

schedule-id

Field	Definition
schedule-id	Enter an existing schedule rule name. See time-rangecommand on
	page 4-62to set the schedule-id

Example: (config-int-mlink-1)# schedule-availability time-range 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

shutdown

Use the Multilink Interface shutdown command to disable the multilink port. To set the Multilink port up (In-Service), see no shutdown command on page 12-20.

Syntax: (config-int-mlink-{n})# shutdown

Example: (config-int-mlink-1)# shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

12-24 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI