Carrier Access none manual No access-list, No authentication login, No date auto-time-update

Global Configuration Mode

Global Configuration Commands

no access-list

Use the no access-listcommand to remove an advanced filtering entry. To add a filter, see access- list command on page 4-5.

Syntax: (config)# no access-list rule rule-nameapply {eth-laneth-wan ppp-waninitialfinal}

Field	Definition
rule-name	Enter an existing rule name to apply this command to.
eth-lan	Ethernet LAN interface.
eth-wan	Ethernet WAN interface.
initial	Initial rules defined here will be applied first to the interface.
final	Final rules defined here will be applied last to the interface.
ppp-wan	PPP WAN interface.

Example: (config)# no access-list rule TestRule-1 apply eth-lan

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no authentication login

Use the no authentication login command to disable RADIUS for login authentication. To enable RADIUS login authentication, see authentication login command on page 4-6.

Syntax: (config)# no authentication login use-radius

Example: (config)# no authentication login use-radius

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no date auto-time-update

Use the no date auto-time-updatecommand to stop the automatic update the clock from the defined server. To enable automatic update of the clock, see date auto-time-updatecommand on page 4-8.

Syntax: (config)# no date auto-time-update

Example: (config)# no date auto-time-update

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-37