Carrier Access none manual Shortcuts

Introduction

Shortcuts

Shortcuts

Keystroke	Description
Up Arrow	Use the up arrow key to re-display a previously entered command. Select the
	up arrow repeatedly, to scroll through all the commands entered starting with
	the most recent.
	Will move curser one character to the left or right.
Left and Right Arrow
?	The question mark will display help for the current command.
[Tab]	Select the Tab key after entering a partial (but unique) portion of the CLI
	command. This will result in the completion of a portion of the command
	and will wait for further input.
	Example:
	(config)#sn [Tab]
	(config)#snmp-server
auto complete	You need only enter enough letters to identify a command as unique. For
	example, entering cont t1 1 at the Global configuration prompt provides you
	access to the configuration parameters for the specified T1 interface.
	Entering controller t1 1 would work as well, but is not necessary.
Backspace	Erases the character to the left.
History	The history shows up to a total of 100 commands. The history command will
	show only the executed commands for the current mode/context.
[Ctrl+A]	Moves the curser to the beginning of the command line.
[Ctrl+E]	Moves the curser to the end of the command line.
[Ctrl+U]	Clears the current displayed command line.
[Ctrl+Z]	Exits from the current mode.

1-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI