Carrier Access none manual Dynamic-dns wildcard, Syntax config# end Example config# end

Global Configuration Mode

Global Configuration Commands

dynamic-dns wildcard

Use the dynamic-dns wildcard command to enable the Dynamic DNS wildcard.

Syntax: (config)# dynamic-dns wildcard enable

Example: (config)# dynamic-dns wildcard enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

end

Use the end command to exit the current configuration mode. Note: This command can be entered in any configuration mode with the same result.

Syntax: (config)# end

Example: (config)# end

#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode. If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config)# exit

Example: (config)# exit

#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI