Carrier Access none manual Log lcc buffer, Log lcc notify

Global Configuration Mode

Global Configuration Commands

log

log lcc buffer

Use the log lcc buffer command to set the buffer size allowed for the Link Cross-Connect (LCC) log buffer.

Syntax: (config)# log lcc buffer kilobytes

Field	Definition
kilobytes	Set the size of the LCC log buffer. Range is 1 - 256 KB. Default is
	16KB.

Example: (config)# log lcc buffer 24

Supported Platforms: MSR

log lcc notify

Use the log lcc notify command to set the remote Link Cross-Connect (LCC) notify level.

Syntax: (config)# log lcc notify {errorinfoip-address address

nonewarn}

Field	Definition
error	Notify for error level.
info	Notify for information level.
ip-address address	Enter IP address of remote system to notify.
none	No notification.
warn	Notify for warning level.

Example: (config)# log lcc notify warn

Supported Platforms: MSR

4-28 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI