Carrier Access none manual No option, No relay, No static-lease

Configuration - DHCP Pool Ethernet Mode

no commands

no option

Use the DHCP Pool no option command to delete a DHCP option. To add a DHCP pool, see option command on page 7-6.

Syntax: (config-dhcp-eth-{n})# no option {6667}

Field	Definition
66	Remove/Disable option 66	(TFTP server name).
67	Remove/Disable option 67	(Boot file name).

Example: (config-dhcp-eth-1)# no option 66

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no relay

Use the DHCP Pool no relay command to disable DHCP relay. To enable relay, see relay command on page 7-6.

Syntax: (config-dhcp-eth-{n})# no relay

Example: (config-dhcp-eth-1)# no relay

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no static-lease

Use the DHCP Pool no static-leasecommand to remove a static DHCP lease. To add a static lease, see static-leasecommand on page 7-7.

Syntax: (config-dhcp-eth-{n})# no static-lease ip-address address

Field	Definition
address	Enter the IP address of the static lease to remove.

Example: (config-dhcp-eth-1)# no static-lease ip-address 10.10.2.100

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 7-5