Carrier Access none manual Ipsec log ike, Example config# ipsec log ike msg-outp

Global Configuration Mode

Global Configuration Commands

ipsec log ike

Use the ipsec log ike command to enable Internet Key Exchange (IKE) related logs. To disable IKE logging, see no ipsec log ike command on page 4-40

Syntax: (config)# ipsec log ike {auto-keyike-intike-msgmsg-byte msg-enc-decmsg_inpmsg-outppri-keyrej-packet}

Field	Definition
auto-key	Enable verbose automatic keying.
ike-int	Enable verbose IKE IPSec interaction.
ike-msg	Print all IKE message ignoring rate limit.
msg-byte	Enable message’s raw byte option.
msg-enc-dec	Enable message’s encryption and decryption.
msg_inp	Enable message’s input structure.
msg-outp	Enable message’s output structure.
pri-key	Enable verbose private key.
rej-packet	Enable verbose IKE reject packets.

Example: (config)# ipsec log ike msg-outp

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-22 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI