Carrier Access none manual Syntax config-int-ser-n# ip primary-dns address

Configuration - Serial Interface Mode

ip primary-dns

Use the Serial Interface ip primary-dnscommand to configure the primary DNS. To delete a primary DNS, see no ip primary-dnscommand on page 13-18.

Syntax: (config-int-ser-{n})# ip primary-dns address

Field	Definition
address	Enter the IP address of the primary server.

Example: (config-int-ser-1)# ip primary-dns 192.168.1.200

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ip rip

ip rip enable

Use the Serial Interface ip rip enable command to enable RIP on this interface. To disable RIP, see no ip rip command on page 13-18.

Syntax: (config-int-ser-{n})# ip rip enable

Example: (config-int-ser-1)# ip rip enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ip rip receive-version

Use the Serial Interface ip rip receive-versioncommand to configure the RIP receive messages on this interface.

Syntax: (config-int-ser-{n})# ip rip receive-version {121or2none}

Field	Definition
121or2	Receive RIP version 1
	Receive RIP version 2
	Receive RIP version 1 and 2.
none	Set RIP version to none.

Example: (config-int-ser-1)# ip rip receive-version none

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 13-11