Carrier Access none manual Dpd-delay, Dpd-enable, Dpd-timeout

Configuration - IPSec Mode

dpd-delay

Use the IPSec dpd-delaycommand to set the Dead Period Detection delay. To set the DPD delay back to the default settings, see no dpd-delaycommand on page 14-12.

Syntax: (config-ipsec {n})# dpd-delay seconds

Field	Definition
seconds	Set the delay time in seconds. Range 1-3600 seconds, with a default of
	60.

Example: (config-ipsec-1)# dpd-delay 200

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

dpd-enable

Use the IPSec dpd-enablecommand to enable Dead Period Detection (DPD). To disable DPD, see no dpd-enablecommand on page 14-12.

Syntax: (config-ipsec {n})# dpd-enable

Example: (config-ipsec-1)# dpd-enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

dpd-timeout

Use the IPSec dpd-timeoutcommand to set the Dead Period Detection (DPD) timeout period. To reset DPD timeout to default setting, see no dpd-timeoutcommand on page 14-12.

Syntax: (config-ipsec {n})# dpd-timeout seconds

Field	Definition
seconds	Set the timeout period in seconds. Range 1-9999 seconds, with a
	default of 120.

Example: (config-ipsec-1)# dpd-timeout

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

14-4 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI