Global Configuration Mode

Global Configuration Commands

ipsec

Use the ipsec commands to create an IPSec connection and to configure IPSec global settings. See Chapter 14, Configuration - IPSec Mode for additional commands in this mode.

ipsec authentication-retries

Use the ipsec authentication-retriescommand to enable the block-ip feature. To disable block-ip, see no ipsec authentication-retriescommand on page 4-40.

Syntax: (config)# ipsec authentication-retries number delay seconds

Field

Definition

number

The maximum number of retries for authentication.

 

Range is 0-2147483647, with a default of 5.

 

 

seconds

The time delay after retries. Range is 0-2147483647 seconds, with a

 

default of 60.

 

 

Example: (config)# ipsec authentication-retries 10 delay 45

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ipsec key generate key

Use the ipsec key generate key command to generate a new public RSA key.

Syntax: (config)# ipsec key generate key

Example: (config)# ipsec key generate key

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

4-21

Page 147
Image 147
Carrier Access none manual Ipsec authentication-retries, Ipsec key generate key