Carrier Access none manual Static-dns, Time-range

Global Configuration Mode

Global Configuration Commands

static-dns

Use the static-dnscommand to configure the DNS Static entries. To delete static DNS entries, see no static-dnscommand on page 4-51.

Syntax: (config)# static-dns hostname hostname ip-address address

Field	Definition
hostname	Enter a DNS static host name of the server.
address	Enter the DNS static IP address.

Example: (config)# static-dns hostname server1 ip-address 192.168.100.100

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

time-range

Use the time-rangecommand to define availability of the Ethernet port. To delete a time range, see no time-rangecommand on page 4-51.

Syntax: (config)# time-range id schedule-idname schedule-name{activeinactive} time-segment time-segment-id{montuewedthufrisatsun} time-range hh:mm-hh:mm

Field	Definition
schedule-id	Enter a schedule ID for the scheduler rule.
schedule-name	Enter a name for the scheduler rule.
active	Sets this time range to be active during the set time.
inactive	Sets this time range to be inactive during the set time.
time-segment-id	Enter time-range ID to apply. Range 0 - 9999
montuewedthufri	Select the days of the week the interface for the rule.
satsun
hh:mm-hh:mm	Set the range of time, start time-end time.
	hh = hours, range 00 - 23
	mm = minutes, range 00 - 59

Example: (config)# time-range id 1 name test1 active time-segment 2 mon 08:00-18:00

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-62 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI