Carrier Access none manual Router-id, Syntax config-ospf# router-id address

Configuration - OSPF Mode

router-id

Use the Router OSPF router-idcommand to use a fixed router ID. To force OSPF to use the previous OSPF router ID behavior use the no form of this command, see no router-idcommand on page 16-8.

Syntax: (config-ospf)# router-id address

Field	Definition
address	Router ID in IP address format.

Example: (router-ospf)# router-id 10.1.1.1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 16-9