Carrier Access none manual Syntax config-vport-fxs-n# output-gain value

Configuration - Voice Port FXS Mode

output-gain

Use the Voice Port FXS output-gaincommand to set the gain on the transmit side voice path for the specified voice channel(s).

Syntax: (config-vport-fxs-{n})# output-gain value

Field

value

Definition

Range -12 to +6dB. Default is 0.

Example: (config-vport-fxs-1)# output-gain 4

Supported Platforms: Adit 3104, Adit 3500, MSR

per-line-logging

Use the Voice Port FXS per-line-loggingcommand to enable the logging per line feature. To to disable logging, see no per-line-loggingcommand on page 23-6

Syntax: (config-vport-fxs-{n})# per-line-logging enable

Example: (config-vport-fxs-1)# per-line-logging enable

Supported Platforms: Adit 3104, Adit 3500, MSR

shutdown

Use the Voice Port FXS shutdown command to set this port down (Out-of-Service). To set this voice port up (In-Service), see no shutdown command on page 23-6.

Syntax: (config-vport-fxs-{n})# shutdown

Example: (config-vport-fxs-1)# shutdown

Supported Platforms: Adit 3104, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 23-7