Carrier Access none manual No network-object, No port-trigger-service, No pptpc

Global Configuration Mode

Global Configuration Commands

no network-object

Use the no network-objectcommand to remove network objects. To enable a network object, see network-objectcommand on page 4-35.

Syntax: (config)# no network-object id object-idtype {hostname

hostnameip-addressaddressmac-addressmac-address}

Field	Definition
object-id	Enter the numerical ID of the Network Object.
hostname	Enter the host name of the Network Object.
address	Enter the IP address of the Network Element.
mac-address	Enter the MAC address of the Network Element (xx:xx:xx:xx:xx:xx)

Example: (config)# no network-object id 1 type ip-address 192.168.1.200

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no port-trigger-service

Use the no port-trigger-servicecommand to remove a port-triggering entry. To configure port triggering, see port-trigger service command on page 4-53.

Syntax: (config)# no port-trigger-service name

Field

name

Definition

Enter service name.

Example: (config)# no port-trigger-service servicename2

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no pptpc

Use the no pptpc command to disable the VPN PPTP client. To enter the VPN PPTP Client configuration mode, see the pptpc command on page 4-53.

Syntax: (config)# no pptpc {pptpc connection-idaddress address}

Field	Definition
connection-id	Enter the name of a connection.
address	Enter a destination IP address.

Example: (config)# no pptpc pptpc 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-45