Global Configuration Mode

Global Configuration Commands

dial-peer voice voip

Use the dial-peer voice voip command to allow access to the Dial Peer Voice VoIP configuration commands. See Chapter 10, Configuration - Dial Peer VoIP Mode for commands in this mode. For the no counterpart of this command see no dial-peer voice voip command on page 4-39.

Syntax: (config)# dial-peer voice voip trunk

Field

trunk

Definition

Enter trunk number. Range is 1-50.

Example: (config)# dial-peer voice voip 1 (config-dpeer-voip)#

Supported Platforms: Adit 3104, Adit 3500, MSR

dmz-host

Use the dmz-hostcommand to configure the DMZ host. To remove a DMZ host, see no dmz-hostcommand on page 4-39.

Syntax: (config)# dmz-host address enable

Field

Definition

address

The IP address of the DMZ host.

 

 

Example: (config)# dmz-host 10.10.200.1 enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-12

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Page 138
Image 138
Carrier Access none manual Dmz-host, Dial-peer voice voip