Carrier Access none manual Configure terminal, Copy defaults, Copy path, Source-path

Privileged Mode

configure terminal

Use the configure terminal command to enter the configuration mode.

Syntax: # configure terminal

Example: adit 3500# configure terminal

adit 3500 (config)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

copy

copy defaults

Use the copy defaults command to restore default setting.

Syntax: # copy defaults running-config

Example: adit 3500# copy defaults running-config

Going to reboot!

Restarting system.

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

copy path

Use the copy path command to load a configuration saved on your computer to the Adit system. Note: A TFTP server must be running on your computer.

Syntax: # copy path {source-path} running-config

Field	Definition
source-path	Enter the source path, in the form tftp://address/filename
	address - Enter IP address of the TFTP server.
	filename - Enter the name of the configuration file to load onto the
	system.

Example: adit 3500# copy path tftp://192.168.1.100/a3500_config running- config

adit 3500#Configuration restore: Success

WARNING: A reload is needed for changes to take effect.

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-3