Carrier Access none manual Syntax config-l2tpc-n# ppp time-btwn-reconnect seconds

Configuration - L2TPC Mode

ppp time-btwn-reconnect

Use the L2TPC ppp time-btwn-reconnectcommand configure the time between reconnect attempts. To reset to default value, see no ppp time-btwn-reconnectcommand on page 15-19.

Syntax: (config-l2tpc-{n})# ppp time-btwn-reconnect seconds

Field	Definition
seconds	Set the interval of time between reconnect attempts.
	Range is 0 - 99999 seconds with a default of 0.

Example: (config-l2tpc-1)# ppp time-btwn-reconnect 15

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp username

Use the L2TPC ppp username command set the PPP Login User Name. To delete a PPP user, see no

pppusername command on page 15-20.

Syntax: (config-l2tpc-{n})# ppp username username

Field	Definition
username	Enter the Username, with a maximum of 19 characters.

Example: (config-l2tpc-1)# ppp username test-user-name

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

schedule-availability

Use the L2TPC schedule-availabilitycommand to apply a schedule rule to this interface. To delete a schedule, see no schedule-availabilitycommand on page 15-20.

Syntax: (config-l2tpc-{n})# schedule-availability time-range schedule-

id

Field	Definition
schedule-id	Enter an existing schedule rule name. See time-rangecommand on
	page 4-62to set the schedule-id

Example: (config-l2tpc-1)# schedule-availability time-range 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 15-23