Carrier Access none manual Show interface description

User Mode

show interface description

Use the show interface description command to display interface information.

Syntax:	> show interface description
Example: Adit 3500> show interface description
Device	State	IP/Mask	Dependencies
T1 1	running		None
T1 2	running		None
T1 3	up		None
T1 4	up		None
Serial 1	up	0.0.0.0/255.255.255.255	T1 1
Ethernet 2	disabled	0.0.0.0/0.0.0.0	None
Ethernet 1	running	192.168.1.1/255.255.255.0	None
IPsec 0	disabled	0.0.0.0/0.0.0.0	Serial 1
IPsec 1	running	192.168.1.1/255.255.255.0	Ethernet 1
Example: Adit MSR> show interface description
Device	State	IP/Mask	Dependencies
LinkCC 1	running		None
LinkCC 2	running		None
LinkCC 3	down		None
LinkCC 4	down		None
LinkCC 5	down		None
LinkCC 6	down		None
LinkCC 7	down		None
LinkCC 8	down		None
Ethernet 2	up	DHCP Unassigned	None
Ethernet 1	running	192.168.1.1/255.255.255.0	None

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-13