Carrier Access none manual Example config-pptps# ppp authentication chap

Configuration - PPTPS Mode

no shutdown

Use the PPTP Server no shutdown command to set the admin state of the server up (in-service).To set the admin state of the server down (out-of-service), see shutdown command on page 18-7.

Syntax: (config-pptps)# no shutdown

Example: (config-pptps)# no shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp authentication

Use the PPTP Server ppp authentication command to configure the support of authentication types for the password. To disable PPP authentication, see no ppp authentication command on page 18-5.

Syntax: (config-pptps)# ppp authentication [chapms-chapms-chapv2pap]

Field	Definition
chap	Support Challenge Handshake Authentication (CHAP)
ms-chap	Support Microsoft CHAP (MS-CHAP).
ms-chapv2	Support Microsoft CHAP Version 2 (MS-CHAPv2).
pap	Support an unencrypted password. Default.

Example: (config-pptps)# ppp authentication chap

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

ppp encryption

Use the PPTP Server ppp encryption command to configure the PPP encryption. To disable PPP encryption, see no ppp encryption command on page 18-5.

Syntax: (config-pptps)# ppp encryption {40-bit128-bitstateful}

Field	Definition
40-bit	MPPE-40 - Microsoft PPP encryption algorithm.
128-bit	MPPE-128 - Microsoft PPP encryption algorithm.
stateful	Enable the stateful state for encryption.

Example: (config-pptps)# ppp encryption stateful

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

18-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI