Carrier Access none manual Configuration LCC Controller Mode, LCC Controller Commands

CHAPTER 5

Configuration - LCC Controller Mode

The LCC (Link Cross-Connect) Controller Configuration commands allow the user to configure the Link Cross-Connect parameters for the MSR card.

Note: The LCC Controller Configuration mode is supported by the MSR card only. For Controller Configuration commands for the Adit 3000 series, see Chapter 6, Configuration - T1 Controller Mode.

This sub-group is entered with the (config)# controller lcc command from the Configuration mode. The LCC Controller commands are represented by the (config-cont-lcc-{n})#prompt.

LCC Controller Commands

•description

•do

•end

•exit

•history

•no command

•shutdown