Carrier Access none manual No reconnect, No set-pfs

Configuration - IPSec Mode

no reconnect

Use the IPSec no reconnect command to disable automatic reconnection. To enable reconnection, see reconnect command on page 14-17.

Syntax: (config-ipsec-{n})# no reconnect

Example: (config-ipsec-1)# no reconnect

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no schedule-availability

Use the IPSec no schedule-availabilitycommand to set schedule availability to the default value. To set a schedule rule, see schedule-availabilitycommand on page 14-18.

Syntax: (config-ipsec-{n})# no schedule-availability

Example: (config-ipsec-1)# no schedule-availability

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

no set-pfs

Use the IPSec no set-pfscommand to disable Perfect Forward Secrecy. To enable PFS, see set-pfscommand on page 14-19.

Syntax: (config-ipsec-{n})# no set-pfs

Example: (config-ipsec-1)# no set-pfs

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 14-15