Carrier Access none manual L2tpc, Key-code, Ipsec, Local-secret secret

Global Configuration Mode

Global Configuration Commands

key

Use the key command to enable a specific keyed feature. To acquire a feature key code, contact Turin Networks Customer Support. To disable a keyed feature, see the no key command on page 4-43.

Syntax: (config)# key key-code

Field	Definition
key-code	Enter the key code to enable the feature.

Example: (config)# key q0B8yma2IsSL+1BarY0u

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

l2tpc

Use the l2tpc command to allow access to the VPN L2TP Connection configuration commands. See Chapter 15, Configuration - L2TPC Mode for commands in this mode. To delete an existing connection, see the no l2tpc command on page 4-43.

Syntax: (config)# l2tpc {l2tpc connection-idaddress address [ipsec local-secret secret] [local-secret secret]}

Field	Definition
connection-id	Enter the connection ID (number).
address	Enter the IP address of the destination.
ipsec	Optional parameter. Directs IPSec to create an L2TP connection.
	Requires the local-secretoption.
local-secret secret	Optional parameter. Enter a secret password used to authenticate
	L2TP connection. Maximum number of characters is 96.

Example: (config)# l2tpc l2tpc 1

(config-l2tpc-1)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

4-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI