Carrier Access none manual Show config access-control

Privileged Mode

show config access-control

Use the show config access-controlcommand to display all access control filters.

Syntax: # show config access-control

Example: adit 3500# show config access-control

access-control id 1 apply-to lan time-range always service 1 enable

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

show config access-list

Use the show config access-listcommand to display all access lists.

Syntax: # show config access-list

Example: adit 3500# show config access-list

access-list rule 0 apply eth-lan direction in operation accept time-range 0 src-host 0.0.0.0-255.255.255.255 dst-host 0.0.0.0-255.255.255.255 service 50331673 frag none log none (enable)

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 3-23