Carrier Access none manual Vlan vlan-id, Voice-codec

Global Configuration Mode

Global Configuration Commands

vlan (vlan-id)

Use the vlan command to allow access to the VLAN port configuration commands. See Chapter 21, Configuration - VLAN Port Mode for commands in this mode.

Syntax: (config)# vlan v-id

Field

v-id

Definition

VLAN identifier. Range 2-4096.

Example: (config)# vlan 100 (config-vlan-100)#

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

voice-codec

Use the voice-codeccommand to select which codecs are to be enabled and allows the user to set the Packetization Time for that codec. To disable a codec, see no voice-codeccommand on page 4-52.

Syntax: (config)# voice-codec {g711alawg711ulawg729} ptime {1020304050607080}

Field	Definition
g711alaw	G.711, 64kbps, A-law
g711ulaw	G.711, 64kbps, μ-law
g729	G.729, 8kbps
ptime	Set the Packetization Time for the codec. Default for all is 20.
	Packetization Time for each codec is as follows:
	G.711A-Law= 10, 20, 30, 40, 50 or 60
	G.711μ-Law= 10, 20, 30, 40, 50 or 60
	G.729 = 10, 20, 30, 40, 50, 60, 70 or 80

Example: (config)# voice-codec g711alaw ptime 30

Supported Platforms: Adit 3104, Adit 3500, MSR

4-64 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI