Carrier Access none manual Session-target, Syntax config-dpeer-voip# prefix prefix, Proxy

Configuration - Dial Peer VoIP Mode

prefix

Use the Dial Peer prefix command to define the prefix of the phone number. To delete a prefix, see no prefix command on page 10-5.

Syntax: (config-dpeer-voip)# prefix prefix

Field

prefix

Definition

Prefix is the digits or a name to be added to the phone number after the stripping process has been applied. Up to 10 digits may be entered.

Example: (config-dpeer-voip)# prefix 1303

Supported Platforms: Adit 3104, Adit 3500, MSR

session-target

Use the Dial Peer session-targetcommand to configure the session target. To delete a target, see no session-targetcommand on page 10-5.

Syntax: (config-dpeer-voip)# session-target {hostname hostname ip-address addresslocal fxs-numberproxy}

Field	Definition
hostname	Indicates that the domain name server will be used to resolve the name
	of the IP address.
address	Enter the IP address of the dial peer.
fxs-number	Enter an FXS port.
	Adit 3104: Range = 1 - 24.
	Adit 3500: Range = 1 - 4.
	MSR: Range = 1 - 48.
proxy	Set the session target to be routed through the proxy.

Example: (config-dpeer-voip)# session-target ip-address 192.168.1.100

Supported Platforms: Adit 3104, Adit 3500, MSR

10-6 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI