Carrier Access none Show port-trigger, Show route, Syntax show route Example Adit 3500 show route

User Mode

show port-trigger

Use the show port-triggercommand to display all port triggering information.

Syntax: > show port-trigger

Example: Adit 3500> show port-trigger

Service ID:134217730	Enable	Service Name:L2TP
Trigger protocol: UDP	port: src_start=0		src_end=0	dst_start=1701	dst_end=1701
Service ID:16777223	Enable	Service Name:TFTP
Trigger protocol: UDP	port: src_start=1024		src_end=65535 dst_start=69		dst_end=69

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

show route

Use the show route command to display the routing table.

Syntax: > show route

Example: Adit 3500> show route

Destination	Gateway	Flags	Metric	Interface
192.168.1.0/24	*	U	50	Ethernet 1
192.168.1.0/24	*	U	51	IPsec 1

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

2-26 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI