Carrier Access none manual Exit, Help

User Mode

exit

Use the exit command to close your current connection if you are in User mode or Privileged mode. If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you to the previous level (example: back to Privileged mode from Interface configuration mode).

Syntax: > exit

Example: Adit 3500> exit

Adit 3500 Username:admin

Adit 3500 Password:********

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

help

Use the help command to display help information. This can also be accomplished with a ?. This command can be entered in any Configuration mode.

Syntax: > help or

> ?

Example: Adit 3500> help
?	Display all commands
date	Display time/date
enable	Enter Privileged mode
end	Logout from the device
exit	Exit from the current level
help	Display all commands
history	Display past entered commands
ping	Ping a remote host
show	Show various system information
traceroute	Traceroute to a remote host

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 2-3