Carrier Access none manual Pri-group, No tdm-group, In-out

Configuration - T1 Controller Mode

no shutdown

Use the Controller T1 no shutdown command to set the T1 up (In-Service). To set the T1 down (Out-of-Service), see shutdown command on page 6-11.

Syntax: (config-cont-t1-{n})# no shutdown

Example: (config-cont-t1-1)# no shutdown

Supported Platforms: Adit 3104, Adit 3200, Adit 3500

no tdm-group

Use the Controller T1 no tdm-groupcommand to ungroup TDM timeslots. To group TDM timeslots, see tdm-groupcommand on page 6-11.

Syntax: (config-cont-t1-{n})# no tdm-group timeslots range

Field

range

Definition

TDM timeslot range, in the format n-n(1-4). Range is 1 - 24.

Example: (config-cont-t1-1)# no tdm-group timeslots 1-4 dir

Supported Platforms: Adit 3104, Adit 3200, Adit 3500

pri-group

Use the Controller T1 pri-groupcommand to group PRI timeslots. To delete a PRI group, see no pri-groupcommand on page 6-9.

Syntax: (config-cont-t1-{n})# pri-group timeslots range dir {inin-outout}

Field	Definition
range	PRI timeslot range, in the format n-n(1-4). Range is 1 - 23.
in	Defines the direction as incoming only.
in-out	Defines the direction as both incoming and outgoing.
out	Defines the direction as outgoing only.

Example: (config-cont-t1-1)# pri-group timeslots 1-4

Supported Platforms: Adit 3104, Adit 3500

6-10 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI