Carrier Access none manual No security-log, Syntax config# no security-log setting, Setting

Global Configuration Mode

Global Configuration Commands

no security-log

Use the no security-logcommand to remove a security policy. To add a security policy, see security-logcommand on page 4-58.

Syntax: (config)# no security-log setting

Field		Definition
setting
Accepted Events	accepted-in-connects	Disable incoming connections logging.
	accepted-out-connects	Disable outgoing connections logging.
Blocked Events	block-conn-attempts	Disable block connection attempts logging.
	blocked-fragments	Disable blocked fragments logging.
	defrag-error	Disable defragmentation errors logging.
	echo-chargen	Disable echo chargen logging.
	icmp-flood	Disable ICMP flood logging.
	icmp-multicast	Disable ICMP multicast logging.
	icmp-redirect	Disable ICMP redirects logging.
	icmp-replay	Disable ICMP replay logging.
	multicast-broadcast	Disable multicast broadcasts logging.
	pkt-illegal-opts	Disable packet illegal options logging.
	spoofed-connection	Disable spoofed connection logging.
	syn-flood	Disable syn flooding logging.
	udp-flood	Disable UDP flooding logging.
	winnuke	Disable winnuke configuration logging.
Other Events	rem-admin-attempts	Disable remote admin attempts logging.
	connection-states	Disable connection states logging.
Log Buffer	prevent-log-overrun	Disable log overrun prevention logging.

Example: (config)# no security-log accepted-outgoing-connection

Supported Platforms: Adit 3104, Adit 3200, Adit 3500, MSR

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 4-49