Technicolor - Thomson SpeedTouchTM620 manual Applying a configuration stored on the SpeedTouch

Chapter 4

SpeedTouch™ Configuration Management

Applying a configuration stored on the SpeedTouch™

To activate a configuration file, stored on the SpeedTouch™ ‘/dl’ subdirectory, the CLI command :config load is used.

Below the syntax of the config load CLI command is provided:

=>help config load

Load saved or default configuration.

Syntax : load [load_ip = <{disabledenabled}>]

[defaults <{disabledenabled}>] [flush = <{enableddisabl

ed}>]

[echo = <{disabledenabled}>] [filename = <string>]

Parameters :

[load_ip = <{disabledenabled}>] Load IP settings or not.

[defaults <{disabledenabled}>]

Load default instead of saved configuration. [flush = <{enableddisabled}>]

Flush current configuration before loading new one. [echo = <{disabledenabled}>]

Echo each command string when loaded. [filename = <string>]

Configuration filename.

Proceeding from the same FTP session you opened in the previous procedure, enter the quote site config load command to load the configuration you previously put on the SpeedTouch™ file system:

ftp> quote site config load 200-

200 CLI command "config load" executed

For more information on the config load options, see“ Applying a configuration stored on the SpeedTouch™” on page 32

38 E-DOC-CTC-20051017-0155 v1.0